Business insurance by industry · Retail, wholesale and manufacturing
Business insurance for small manufacturers
Verify before use · Last reviewed Nov 19, 2026 · General information, not legal or insurance advice.
Plain-English summary
Manufacturers typically need general liability with products and completed operations coverage, property coverage for the building, machinery and stock, equipment breakdown, business income, and workers’ compensation once you have employees. Product recall, pollution and cyber coverage are worth discussing depending on what you make.
Often required
These are coverages that laws, licensing agencies or contracts commonly require for this kind of business. Requirements vary by state, and sometimes by city, county and contract, so confirm what applies to you with your state agencies and your agent.
Example: An operator is injured by a press or saw.
Why it is often required: Required by law for most employers in most states. Triple-I says Texas is the exception where private employers can choose, and rules on how many employees trigger the requirement vary by state.
How it works
Workers’ compensation pays medical care and replaces part of lost wages for employees hurt or made ill on the job, regardless of who was at fault, and provides benefits to a worker’s family if the worker dies from a job injury. The second part of the policy, employers liability, protects you when an employee or family member can sue for a work injury outside the workers’ compensation system.
Triple-I says employers in every state except Texas must carry workers’ compensation once they have more than a certain number of employees, and that number depends on the state. Rules on who must be covered, including owners, part-time workers and subcontractors, vary by state.
Common exclusions and gaps
Independent contractors and subcontractors who don’t carry their own coverage; the Virginia guide notes an insurer can count what you paid an uninsured subcontractor as payroll.
Work in states not listed on your policy.
What to ask your agent
Which states do I need listed on the policy?
Are owners or officers included or excluded, and what does my state allow?
Are my employees classified correctly for the work they actually do?
How does the year-end payroll audit work?
Should I collect certificates of insurance from subcontractors?
Example: A part you made fails in a customer’s product and causes injury.
Why it is often required: Not usually required by law, but commonly required by contracts, leases and clients before you can start work.
How it works
General liability pays for claims that your business caused bodily injury or property damage to someone else, including your legal defense, up to the policy limits. The California Department of Insurance describes three main parts: premises liability (injuries or damage from a condition on your premises or from your work in progress, on or away from your premises), products liability (claims arising from goods you make, sell, handle or distribute) and completed operations (claims arising from work you have finished).
The standard policy also includes coverage for personal and advertising injury, such as libel or slander, and medical payments for people hurt on your premises. Policies have separate limits, including an aggregate limit for most claims and a separate aggregate for products and completed operations claims; once an aggregate is used up, the policy pays no more claims for that policy period.
Common exclusions and gaps
Injuries to your own employees (that is workers’ compensation and employers liability).
Accidents involving autos your business uses (that needs commercial auto).
Mistakes in professional advice or services (that needs professional liability).
Liquor liability, pollution, and damage to property in your care, custody or control, which the California Department of Insurance lists among the major exclusions.
Damage to your own work and the cost of redoing faulty work.
Intentional injury.
What to ask your agent
What are the per-occurrence, general aggregate and products-completed operations aggregate limits?
Is my business classified correctly? The classification drives how the policy is rated.
Can you add clients or landlords as additional insureds when a contract requires it, and is that done by a blanket endorsement or one at a time?
Are any of my activities excluded or limited by endorsement?
Coverages most businesses like this carry or are advised to consider, even where no law requires them.
Commercial property
Example: A fire damages machinery and raw materials.
How it works
Commercial property insurance pays to repair or replace property your business owns or uses when it is damaged, destroyed or stolen by a covered cause of loss. The California Department of Insurance describes the basic parts as buildings you own or lease as part of your business, your business personal property (furniture, equipment that is not permanently installed, inventory and similar items) and personal property of others in your care.
You choose between a specified (named) perils form, which covers only the causes listed, and an open perils form, which covers all causes not excluded. Losses are paid on an actual cash value, replacement cost or agreed value basis, depending on the policy. If you insure a building for less than its value, a coinsurance clause can reduce what you are paid for a partial loss.
Common exclusions and gaps
Flood and earth movement, including earthquake, which are common exclusions even on open perils forms.
Breakdown of boilers and machinery, which most commercial property policies exclude unless you add equipment breakdown coverage.
Property away from your premises or in transit, which usually needs inland marine coverage.
Outdoor signs, unless coverage is specifically added.
Being underinsured, which can trigger a coinsurance penalty.
What to ask your agent
Is my property valued at replacement cost or actual cash value?
How was the building limit set, and could I face a coinsurance penalty?
Are improvements I made to a leased space covered?
Can you add an inflation guard so my limits keep up with rebuilding costs?
Example: A key machine breaks down and halts production. Property policies usually exclude mechanical breakdown.
How it works
Equipment breakdown, historically called boiler and machinery insurance, covers sudden mechanical or electrical breakdown of equipment such as heating and air conditioning systems, refrigeration, production machinery and electrical panels. The NAIC glossary says benefits include damage to your property from the accident, temporary repairs and expediting expenses, and liability for damage to others’ property, plus equipment inspection.
The California Department of Insurance notes that most commercial property policies exclude losses from boilers and machinery, which is why this coverage is often added separately or to a BOP.
Common exclusions and gaps
Gradual wear and tear and routine maintenance are generally not covered.
Equipment not covered by the endorsement or schedule.
Spoilage and lost income unless those coverages are included.
What to ask your agent
Is equipment breakdown included in my property policy or BOP, or do I need to add it?
Does it cover spoilage of refrigerated goods and lost income after a breakdown?
Business income and extra expense (business interruption)
Example: Production stops after a fire.
How it works
Business income coverage replaces income you lose when your business has to slow down or close because of direct physical damage to property from a covered cause, such as a fire. Extra expense coverage pays reasonable added costs to keep operating, such as temporary space or equipment rental.
Triple-I notes that business income coverage is included in a BOP, and the Virginia guide explains it can reimburse expenses such as salaries, taxes and rent plus the net profit you would have earned during the interruption, up to the policy limits.
Common exclusions and gaps
Closures that are not caused by physical damage from a covered cause.
Losses from causes the property policy excludes, such as flood unless separately insured.
Income lost after the coverage period in your policy ends.
What to ask your agent
How long will business income coverage pay after a covered loss?
Does the policy include extra expense, and how is lost income calculated?
Is income lost because of damage at a key supplier or customer covered?
Example: Distributors require products coverage and ask to be added as additional insureds.
How it works
Product liability covers claims that a product your business made, distributed or sold caused injury or property damage. The SBA lists it for businesses that manufacture, wholesale, distribute and retail a product, and the NAIC glossary describes it as protecting manufacturers, distributors, sellers and lessors against liability for defective products.
For many businesses, products coverage is part of general liability (the products-completed operations part), with its own aggregate limit. Higher-risk products may need a separate policy.
Common exclusions and gaps
Product recalls and the cost of replacing the product itself are often not covered.
Check for exclusions tied to specific product types or territories.
What to ask your agent
Is products-completed operations included in my general liability, and with what limit?
Am I covered for products I import or private-label?
Do retailers I sell to require me to name them as additional insureds?
Example: A product claim exceeds your primary limits.
How it works
A commercial umbrella pays above the limits of your underlying liability policies, such as general liability, commercial auto and employers liability, when a large claim uses up those limits. Triple-I says it is designed to protect against unusually high losses, and the California Department of Insurance notes an umbrella can also fill some gaps in the underlying policies, subject to a self-insured retention.
The Virginia guide suggests thinking about the most extreme situation that could happen in your business and whether your current liability policies would cover it.
Common exclusions and gaps
Anything excluded by the umbrella itself; umbrellas don’t automatically follow every underlying coverage.
Claims below the underlying limits, which your primary policies must pay first.
What to ask your agent
Which of my policies does the umbrella sit over?
Do clients or contracts require a specific umbrella limit?
What does the umbrella exclude that my primary policies cover?
Coverages that fit some businesses in this industry depending on what you do, what you own and what your contracts say.
Pollution liability
Example: A solvent spill contaminates soil. Pollution is commonly excluded.
How it works
Pollution liability covers claims for injury or damage caused by pollutants such as chemicals, fumes, fuel or waste. The NAIC glossary describes environmental pollution liability as coverage for bodily injury or property damage from acids, fumes, smoke, toxic chemicals, waste or other pollutants. The California Department of Insurance lists pollution among the major exclusions in a standard general liability policy.
Common exclusions and gaps
Pollution excluded under general liability unless a limited exception applies.
Known or pre-existing contamination.
Fines and penalties.
What to ask your agent
Does my work create a pollution exposure that general liability excludes?
Is contractors pollution liability or a premises pollution policy right for me?
Example: Ransomware shuts down production systems.
How it works
Cyber insurance helps with the costs and liability that follow a data breach, computer virus or online attack. The NAIC glossary describes cyber coverage as protection for risks of online commerce, including privacy violations. Policies vary widely: some focus on your own costs (such as investigation, notifying customers and restoring data), others on liability to people whose information was exposed.
Triple-I notes that a business that relies on electronic commerce can add coverage to a BOP for lost income and extra expenses if a virus or hacker slows or stops its ability to do business online.
Common exclusions and gaps
Coverage varies widely; check whether funds lost when an employee is tricked into sending a payment are covered or need a separate endorsement.
Check whether the policy requires specific security steps as a condition of coverage.
Physical damage to computers is generally a property matter, not cyber.
What to ask your agent
Does the policy cover my own costs, liability to others, or both?
Is funds-transfer or social engineering fraud covered?
Does the insurer require security steps such as multi-factor authentication or backups?
Inland marine (tools, equipment and property in transit)
Example: Finished goods are damaged in transit.
How it works
Despite the name, inland marine insurance covers business property that moves or is away from your main location. The California Department of Insurance describes it as property insurance that primarily covers business property in transit, along with liability for property in your care during transport. Common forms include equipment floaters (such as contractors’ equipment), installation floaters, motor truck cargo, valuable papers and accounts receivable coverage.
The Virginia guide adds that inland marine can cover property in the custody of others, sales samples and contractors’ equipment. For many businesses, this is how tools and portable equipment are insured on job sites and in vehicles.
Common exclusions and gaps
Property at your main premises, which is usually insured under commercial property.
Depending on the form, wear and tear, mechanical breakdown or some kinds of theft may be excluded or limited.
Items not scheduled on the policy when the form requires scheduling.
What to ask your agent
Are my tools and equipment covered on job sites, in vehicles and overnight?
Do I need to schedule individual items, and at what value?
Crime insurance protects business assets such as money, securities and merchandise. The California Department of Insurance says, depending on the coverage bought, it can cover robbery, burglary, larceny, forgery and embezzlement. The Virginia guide adds coverage for counterfeit currency and employee dishonesty.
A fidelity bond, which the NAIC glossary describes as covering an employer’s loss from an employee’s dishonest act, is a closely related way to protect against theft by employees.
Common exclusions and gaps
Losses discovered after any discovery period in the policy.
Theft from client premises, which is covered only if the policy includes it.
What to ask your agent
Does the policy cover employee theft, forgery and money stolen off premises?
Is theft from customers’ premises by my employees covered?
Clients, especially larger companies and government agencies, often set insurance requirements in contracts, such as professional liability, general liability and cyber limits, and may ask for a certificate before you start.
Watch for contract clauses that make you indemnify the client for claims beyond your own negligence; your policy may not cover liability you take on by contract. Send contracts to your agent before you sign.
Disclaimer: This guide is general, plain-English information, not legal, tax or insurance advice, and it is not a list of what any particular business must buy. Legal requirements vary by state, city and county, and by contract; your policy wording, your contracts and your state’s laws control. Confirm requirements with your state licensing agencies and insurance department, and review coverage with a licensed agent.
Is something missing or incorrect?
Cookies and privacy
We use cookies for site function and analytics (Google Analytics). We don’t use advertising cookies. Privacy Policy · Do Not Sell or Share.