InsuranceReference.org
Business insurance by industry · Construction and trades

Business insurance for roofing contractors

Verify before use · Last reviewed Nov 19, 2026 · General information, not legal or insurance advice.

Plain-English summary

Roofing work carries serious fall and water damage risks. You typically need general liability (ask whether any roofing operations are limited or excluded), workers’ compensation (California requires it for roofing licenses even without employees), commercial auto and, in many states, a license bond. Tools coverage and an umbrella are common.

Often required

These are coverages that laws, licensing agencies or contracts commonly require for this kind of business. Requirements vary by state, and sometimes by city, county and contract, so confirm what applies to you with your state agencies and your agent.

Licensing and bonds vary by state, county and city. For example, the California Contractors State License Board requires a contractor’s bond before it will issue an active license, and requires workers’ compensation for certain license classifications even if the contractor has no employees. Source: California Contractors State License Board: Bond requirements (opens in a new tab); California Contractors State License Board: Get Licensed to Build guide (opens in a new tab).

Workers’ compensation is required by law for most employers. Triple-I notes Texas is the exception where private employers may choose, and the number of employees that triggers the requirement varies by state. Your state workers’ compensation agency is the authority. Source: Triple-I (Insurance Information Institute): Small Business Insurance Basics (opens in a new tab); U.S. Department of Labor: State workers’ compensation officials (opens in a new tab).

Vehicles your business owns must meet your state’s auto insurance requirements. A personal auto policy may not cover vehicles used mainly for business, so tell your agent how you use them. Source: Virginia State Corporation Commission: Virginia Commercial Insurance Guide (opens in a new tab).

Check your state: Insurance by State, How to Verify Workers’ Compensation Coverage, How to Find Your State’s Minimum Auto Insurance Requirements, How to Check a Contractor’s License and Surety Bond.

General liability (commercial general liability)

Example: Rain gets into a home through a roof you left open overnight, damaging ceilings and furniture. Ask how your policy treats water intrusion during the job.

Why it is often required: Not usually required by law, but commonly required by contracts, leases and clients before you can start work.

How it works

General liability pays for claims that your business caused bodily injury or property damage to someone else, including your legal defense, up to the policy limits. The California Department of Insurance describes three main parts: premises liability (injuries or damage from a condition on your premises or from your work in progress, on or away from your premises), products liability (claims arising from goods you make, sell, handle or distribute) and completed operations (claims arising from work you have finished).

The standard policy also includes coverage for personal and advertising injury, such as libel or slander, and medical payments for people hurt on your premises. Policies have separate limits, including an aggregate limit for most claims and a separate aggregate for products and completed operations claims; once an aggregate is used up, the policy pays no more claims for that policy period.

Common exclusions and gaps

  • Injuries to your own employees (that is workers’ compensation and employers liability).
  • Accidents involving autos your business uses (that needs commercial auto).
  • Mistakes in professional advice or services (that needs professional liability).
  • Liquor liability, pollution, and damage to property in your care, custody or control, which the California Department of Insurance lists among the major exclusions.
  • Damage to your own work and the cost of redoing faulty work.
  • Intentional injury.

What to ask your agent

  • What are the per-occurrence, general aggregate and products-completed operations aggregate limits?
  • Is my business classified correctly? The classification drives how the policy is rated.
  • Can you add clients or landlords as additional insureds when a contract requires it, and is that done by a blanket endorsement or one at a time?
  • Are any of my activities excluded or limited by endorsement?

Learn more: General Liability

Workers’ compensation and employers liability

Example: A roofer falls from a roof. In California, the Contractors State License Board requires workers’ compensation for roofing license holders even if they have no employees.

Why it is often required: Required by law for most employers in most states. Triple-I says Texas is the exception where private employers can choose, and rules on how many employees trigger the requirement vary by state.

How it works

Workers’ compensation pays medical care and replaces part of lost wages for employees hurt or made ill on the job, regardless of who was at fault, and provides benefits to a worker’s family if the worker dies from a job injury. The second part of the policy, employers liability, protects you when an employee or family member can sue for a work injury outside the workers’ compensation system.

Triple-I says employers in every state except Texas must carry workers’ compensation once they have more than a certain number of employees, and that number depends on the state. Rules on who must be covered, including owners, part-time workers and subcontractors, vary by state.

Common exclusions and gaps

  • Independent contractors and subcontractors who don’t carry their own coverage; the Virginia guide notes an insurer can count what you paid an uninsured subcontractor as payroll.
  • Work in states not listed on your policy.

What to ask your agent

  • Which states do I need listed on the policy?
  • Are owners or officers included or excluded, and what does my state allow?
  • Are my employees classified correctly for the work they actually do?
  • How does the year-end payroll audit work?
  • Should I collect certificates of insurance from subcontractors?

Learn more: Workers' Compensation

Commercial auto

Example: Your truck towing a dump trailer full of old shingles is in an accident.

Why it is often required: Vehicles your business owns must meet your state’s auto insurance requirements, and a personal auto policy may not cover business use.

How it works

Commercial auto insurance covers liability for injuries and damage your business vehicles cause to others, and can cover damage to the vehicles themselves. The California Department of Insurance explains that a business auto policy can cover owned, hired and non-owned autos, with coverage assigned to vehicles through “covered auto symbols.”

Triple-I notes that if you use a personal car for business, such as transporting supplies or visiting customers, you should make sure your auto insurance covers those trips. Vehicles your business owns must also meet your state’s auto insurance requirements.

Common exclusions and gaps

  • Tools, equipment and cargo carried in the vehicle, which may need inland marine or cargo coverage instead.
  • Employees’ personal cars used for errands, unless you have hired and non-owned auto coverage.
  • Drivers or vehicles not listed or not covered by the auto symbols on your policy.

What to ask your agent

  • Which covered auto symbols apply to my vehicles?
  • Am I covered when employees drive their own cars or rent vehicles for work?
  • Should I carry physical damage coverage on each vehicle?
  • What driver information do you need, and how are new drivers added?

Learn more: Commercial Auto

License and permit bonds

Example: Many states and localities require a license or permit bond so that customers and the public have a way to recover money if you fail to follow licensing laws or building codes. The bond protects the public, not you, and the surety can seek repayment from you for any claim it pays.

Why it is often required: Often required to get or keep a license. Requirements depend on your state, city or county.

How it works

A license or permit bond is a surety bond a government agency requires before it issues or renews a license or permit. The Virginia guide explains that governmental agencies may require these bonds to guarantee that a business complies with laws and ordinances, and the SBA notes that commercial bonds protect the public against things like fraud.

A bond is not insurance for your business: if the surety pays a valid claim, it expects you to pay it back. For example, California’s Contractors State License Board says a contractor’s bond must be in place before it issues an active license and protects consumers harmed by license-law violations and employees owed wages.

Common exclusions and gaps

  • A bond does not protect your business; you must reimburse the surety for claims it pays.
  • A bond does not replace general liability or other insurance.
  • Letting a required bond lapse can suspend a license.

What to ask your agent

  • Does my state or city require a license or permit bond for my work?
  • What will the surety need to approve the bond?
  • How do renewals work, and who files the bond with the agency?

Learn more: License and Permit Bonds

Commonly recommended

Coverages most businesses like this carry or are advised to consider, even where no law requires them.

Inland marine (tools, equipment and property in transit)

Example: Nail guns, ladders and a compressor are stolen from a job site.

How it works

Despite the name, inland marine insurance covers business property that moves or is away from your main location. The California Department of Insurance describes it as property insurance that primarily covers business property in transit, along with liability for property in your care during transport. Common forms include equipment floaters (such as contractors’ equipment), installation floaters, motor truck cargo, valuable papers and accounts receivable coverage.

The Virginia guide adds that inland marine can cover property in the custody of others, sales samples and contractors’ equipment. For many businesses, this is how tools and portable equipment are insured on job sites and in vehicles.

Common exclusions and gaps

  • Property at your main premises, which is usually insured under commercial property.
  • Depending on the form, wear and tear, mechanical breakdown or some kinds of theft may be excluded or limited.
  • Items not scheduled on the policy when the form requires scheduling.

What to ask your agent

  • Are my tools and equipment covered on job sites, in vehicles and overnight?
  • Do I need to schedule individual items, and at what value?
  • Is theft from an unattended vehicle covered?

Learn more: Inland Marine

Commercial umbrella or excess liability

Example: A severe fall injury to a third party exceeds your liability limits.

How it works

A commercial umbrella pays above the limits of your underlying liability policies, such as general liability, commercial auto and employers liability, when a large claim uses up those limits. Triple-I says it is designed to protect against unusually high losses, and the California Department of Insurance notes an umbrella can also fill some gaps in the underlying policies, subject to a self-insured retention.

The Virginia guide suggests thinking about the most extreme situation that could happen in your business and whether your current liability policies would cover it.

Common exclusions and gaps

  • Anything excluded by the umbrella itself; umbrellas don’t automatically follow every underlying coverage.
  • Claims below the underlying limits, which your primary policies must pay first.

What to ask your agent

  • Which of my policies does the umbrella sit over?
  • Do clients or contracts require a specific umbrella limit?
  • What does the umbrella exclude that my primary policies cover?

Learn more: Umbrella and Excess Liability

Contract surety bonds (bid, performance and payment)

Example: A commercial roofing job requires performance and payment bonds.

How it works

Contract bonds guarantee that you will do what a contract requires. The SBA explains that bid bonds back your bid, performance bonds guarantee the work will be completed and payment bonds guarantee subcontractors and suppliers will be paid. Many public and private contracts require them.

The Virginia guide gives the example of a builder whose client requires a bond: if the builder fails to perform, the client can recover from the bond, and the surety then seeks reimbursement from the builder. The SBA guarantees certain contract bonds for small businesses that might not otherwise qualify.

Common exclusions and gaps

  • Bonds are credit, not insurance; you owe the surety for claims it pays.
  • A bond does not cover your own losses or liability to the public.

What to ask your agent

  • What bonding capacity can I get, and what financial records will the surety want?
  • Could the SBA surety bond guarantee program help my business qualify?

Learn more: Contract Bonds

Optional coverages to consider

Coverages that fit some businesses in this industry depending on what you do, what you own and what your contracts say.

Pollution liability

Example: Tear-off releases contaminants.

How it works

Pollution liability covers claims for injury or damage caused by pollutants such as chemicals, fumes, fuel or waste. The NAIC glossary describes environmental pollution liability as coverage for bodily injury or property damage from acids, fumes, smoke, toxic chemicals, waste or other pollutants. The California Department of Insurance lists pollution among the major exclusions in a standard general liability policy.

Common exclusions and gaps

  • Pollution excluded under general liability unless a limited exception applies.
  • Known or pre-existing contamination.
  • Fines and penalties.

What to ask your agent

  • Does my work create a pollution exposure that general liability excludes?
  • Is contractors pollution liability or a premises pollution policy right for me?

Learn more: General Liability

Cyber liability and data breach

Example: Your customer files are held for ransom.

How it works

Cyber insurance helps with the costs and liability that follow a data breach, computer virus or online attack. The NAIC glossary describes cyber coverage as protection for risks of online commerce, including privacy violations. Policies vary widely: some focus on your own costs (such as investigation, notifying customers and restoring data), others on liability to people whose information was exposed.

Triple-I notes that a business that relies on electronic commerce can add coverage to a BOP for lost income and extra expenses if a virus or hacker slows or stops its ability to do business online.

Common exclusions and gaps

  • Coverage varies widely; check whether funds lost when an employee is tricked into sending a payment are covered or need a separate endorsement.
  • Check whether the policy requires specific security steps as a condition of coverage.
  • Physical damage to computers is generally a property matter, not cyber.

What to ask your agent

  • Does the policy cover my own costs, liability to others, or both?
  • Is funds-transfer or social engineering fraud covered?
  • Does the insurer require security steps such as multi-factor authentication or backups?

Learn more: Cyber

Hired and non-owned auto liability

Example: Employees use their own vehicles to pick up materials.

How it works

Hired and non-owned auto coverage protects your business from liability when employees drive their own cars or rented vehicles for work, such as running to the bank, picking up supplies or visiting a client. The California Department of Insurance explains that a business auto policy can be set up to cover hired and non-owned autos;.

Common exclusions and gaps

  • Damage to the employee’s own car, which this coverage usually does not pay.
  • Vehicles your business owns, which need full commercial auto coverage.

What to ask your agent

  • Can hired and non-owned auto be added to my policy?
  • How does it work alongside an employee’s personal auto policy?

Learn more: Commercial Auto

Certificates and contract requirements

General contractors, property owners and many homeowners ask for a certificate of insurance before you start work. A certificate only summarizes your coverage on the date it is issued; the Texas Department of Insurance notes that a certificate may not change, extend or alter the coverage in your policy.

Construction contracts commonly ask you to name the client as an additional insured on your general liability policy, to include a waiver of subrogation, and sometimes to make your coverage primary and non-contributory. These must be added to the policy itself by endorsement; listing them only on a certificate does not provide them.

Read the insurance section of every contract before you sign it and send it to your agent. Hold harmless and indemnity clauses can shift another party’s liability to you, and contractual liability coverage in your policy may or may not pick that up.

If you hire subcontractors, collect current certificates from them and keep them on file. Uninsured subcontractors can increase what you pay at your workers’ compensation and general liability audits.

What is a certificate of insurance?

Documents to have ready for a quote

Having these ready helps an agent quote accurately and spot gaps:

  • Your legal business name, mailing address, and how the business is organized (sole proprietor, partnership, LLC or corporation)
  • A clear description of what your business does, and what it does not do
  • Estimated annual revenue, and payroll by job type if you have employees
  • Your current policies, their limits and renewal dates
  • Your claims history for recent years (a loss run report from your current insurer)
  • Copies of any contracts, leases or permits that set insurance requirements
  • Your contractor license number and the license classifications you hold, if your state licenses your trade
  • The types of jobs you do (residential, commercial, new construction, remodeling, repair) and roughly how your work splits between them
  • How much work you hire out to subcontractors, and whether they carry their own insurance
  • A list of vehicles, with who drives them, and major tools and equipment you take to job sites

Sources

Sources checked Nov 19, 2026. Where a state agency is cited, its guidance is an example for that state; rules in your state may differ.

Related on this site

Glossary terms

More guides: Construction and trades

See all industries A to Z

Disclaimer: This guide is general, plain-English information, not legal, tax or insurance advice, and it is not a list of what any particular business must buy. Legal requirements vary by state, city and county, and by contract; your policy wording, your contracts and your state’s laws control. Confirm requirements with your state licensing agencies and insurance department, and review coverage with a licensed agent.

Is something missing or incorrect?